Дыигатель Б/К датчиковый 3.5 витка (Velociti 3.5R Racing / Sintered Rotor)

Novak's High-Velociti Motors

Novak's Velociti Racing-Series Brushless Motors is a culmination of several years experience developing sensored brushless motors. Specifically designed for R/C vehicles, each Velociti brushless motor is designed for racing, and is capable of reaching speeds fast enough to satisfy the needs of serious racers, as well as those who just want to go fast. There are five motors in the Velociti series: 3.5-turns (#3403), 4.5-turns (#3404), 5.5-turns (#3405), 6.5-turns (#3406), and 7.5-turns (#3407).
GTB Brush/Brushless ESC

All Velociti motors are compatible with the Novak GTB Programmable Racing Brushless/Brush ESC (#1710), to which the Velociti motor comes factory-wired when purchased as a system. The GTB/Velociti brushless systems include all of the extra performance-enhancing components required for world-class racing, making them ready-to-race straight out of the box (nothing extra to buy or install). Because the Velociti motor was specifically developed for the GTB, and the entire system is factory-tested, racers can be assured that the GTB/Velociti system will provide optimum performance.

Each Velociti brushless motor and GTB/Velociti brushless system has been equipped with Novak's ROAR-approved Nickel-plated Sintered Neodymium rotor1. The high-performance rotor is ideal for use with any and all applications. Benefits include:
Significantly increased magnetic strength for improved throttle feel
Improved, stronger motor braking power
Improved performance in higher temperature conditions
Improved motor acceleration and power
Higher efficiency
Lower current draw
Nickel-plated rotor for a long lasting, smooth, clean finish
ROAR approved

In addition, all Velociti brushless motors now feature a set of ribbed aluminum end bells2. The lightweight aluminum end bells not only reduce the overall weight of the motor, but the ribbed design also acts as a heat sink by efficiently removing excessive heat from the motor.

Other great features found in the Velociti motors include sensor-based technology for excellent starting torque and low-speed driveability; an oversized front bearing for increased load handling and longer bearing life; longer run-times than brushed motors, and ROAR-approved specifications. Additional features include solder tabs, thermal overload protection, various user-replaceable parts, and a virtually maintenance-free design.

Of its many features, its sensor-based design allows for most of the Velociti's important benefits, including the following:
No Cogging--Thanks to constantly knowing the rotor position, the motor provides instantaneous throttle response & smooth transitions from neutral to drive. The rotor position knowledge is attained due to the ESC & motor being continuously synchronized via the motor harness.

Smooth & Controlled Low Speed Driveability--Always knowing the rotor angle is key to smooth acceleration without delivering abrupt and uncontrolled bursts of power.

Strong/Consistent Brakes & Starting Torque--Rotor position knowledge results in consistent starts & stops, without hesitation or inconsistent lag times before acceleration or braking--this translates to consistant lap times.

Thermal Protection--Position & temperature sensors inside motor provide unparalleled thermal protection, letting you to run pack after pack without worrying about overheating the motor, ESC, or magnets.

Each motor is factory hand-wound and is put through rigorous testing, including a final dyno test to ensure that each Velociti motor meets Novak’s rigid specifications.

The Velociti motors are available for individual purchase (#3403, #3404, #3405, #3406, and #3407), or sold as a system (#3000, #3001, #3002, #3003, & #3007) with the GTB ESC. When purchased as a system, it includes the GTB Programmable Racing Brushless/Brush ESC, and a Velociti Racing Brushless Motor. A GTB System provides a great value to the customer as everything is installed and ready-to-go, with the bonus of additional savings over purchasing the motor and speed control individually.

To find out which motor or motor system is best suited for you, see below:
Velociti 3.5R This is ideal for customers wanting Novak's fastest brushless motor and for top-level competition touring car applications (#3403/#3000)
Velociti 4.5R Ideal for competition touring cars (#3404/#3001)
Velociti 5.5R Ideal for competition touring cars and high-traction off-road applications
(#3405/#3002)
Velociti 6.5R Ideal for Off-Road and low-traction applications and faster than the Velociti 7.5
(#3406/#3003)
Velociti 7.5R Ideal for Off-Road and low-traction applications
(#3407/#3007)

All Velociti motors are compatible with all Novak brushless ESCs, including:
GTB Spread Spectrum ESC (#1711)
GTB 4-Cell Programmable Brushless/Brush ESC (#1714)
GTB 4-Cell Spread Spectrum Brushless/Brush ESC (#1715)

[Please note, the Velociti-series brushless motors are not for use with Novak’s Super Sport ESC. The Super Sport and Super Sport Plus ESCs are rated for use down to 8.5 turns brushless.]VELOCITI BRUSHLESS MOTOR FEATURES
Sensor-based for excellent braking and low-speed driveability
High-performance Nickel-plated Sintered Neodymium rotor1 (ROAR-Approved!) for maximum motor acceleration, braking power, and performance in high-temperature conditions
Oversized front bearing for increased load handling and bearing life

Lightweight ribbed aluminum end bells2

Provides approximately 20% longer run-times compared to brushed motors

Specifically designed for R/C vehicles

Direct-Solder Wiring Tabs for flexible soldering options

Minimal maintenance

User-replaceable rotor, front end bell/bearing, and rear bearing

Thermal Overload Protection (when used with a Novak brushless ESC)

No cogging

Factory hand-wound and race-tuned
Meets all ROAR specifications

VELOCITI BRUSHLESS MOTOR SPECIFICATIONS (click to link to motor spec chart)
Turns: 3.5 (#3403); 4.5 (#3404); 5.5 (#3405); 6.5 (#3406); 7.5 (#3407 System)
Design: Sensor-based
Motor Size: 2.08” L X 1.41” D (52.8 x 35.8 mm)
Input Voltage: 4-6 cells (1.2 V/cell or 4.8 – 7.2 total volts)
Magnet: Nickel-plated, Sintered, high-strength Neodymium1
Watts: 620 (#3403), 530 (#3404), 420 (#3405), 390 (#3406), 340 (#3407)
KV (unloaded): 10,500 (#3403); 9,000 (#3404); 7,400 (#3405); 6,400 (#3406); 5,800 (#3407) RPM/Volt
Motor Size: 540 Size: 2.08” L X 1.41” D (52.8 x 35.8 mm)
Motor Weight: 6.61 oz. (187 grams)
Shaft Diameter: 0.125” (3.2 mm) [accepts all existing pinion gears]
Bearing Size: 1/2” x 3/16” (12.7x4.8mm)
Timing Ring: Black
Protection: Thermal
1 Effective February 2007, the Velociti 4.5R, Velociti 5.5R, Velociti 6.5R, and Velociti 7.5R motors have been upgraded with a Sintered rotor.
2 Effective February 2007, the Velociti 5.5R, 6.5R, and 7.5R have been upgraded with ribbed end bells.

For information about Novak's brushless motors click on the following links:
SS5800 Brushless Motor - 8.5 (#3400)
SS4300 Stock Brushless Motor - 10.5 (#3401)
SS13.5 Stock Brushless Motor - 13.5 (#3413)
Crawler Brushless Motor (#3418)
HV4.5 High-Voltage Brushless Motor (#3424)
HV6.5 High-Voltage Brushless Motor (#3426)